Good for hopup screw adjustment. For Drive Style Hex Size 2.5 mm Overall Length 5 1/8" Shaft Length 2 3/4" Overall Width 3/32" Maximum Access Angle 25° Material Steel Finish Black Phosphate Coated Handle Material Plastic Grip Style Ultra Grip Tip Style Ball

We cut and re-crown barrels using our lathe, we then deburr and inspect for machining errors and errors in our craftsmanship. Steel is slightly more expensive to work than brass because it is much harder. It takes more time to cut and wears our...

Designed for CA M249 / A&K M249 / Echo1 M249 / Matrix M249 series. Not compatible with Featherweight version. Can work with Middleweight version with modifications. *2020 Gen 5 kit, increased air volume for better power output as well as heavier feeling recoil. The Daytona...

Designed for the A&K/Echo1 M240. Can be made to fit in JG/Golden Eagle M240 with extensive modifications. The Daytona Airsoft M240 kit converts your AEG M240 to a HPA-powered recoil system that allows you to use AEG M240 box mags. No more green gas or propane cooldown.  Standard version offers around 1.5...

Designed for the A&K M60 and its variants. Can be made to work for LCT M60NV with extensive machining & fitting modifications. The Daytona Airsoft M60 kit converts your AEG M60 to a HPA-powered recoil system that allows you to use AEG M60 box mags. No more green gas or propane cooldown.  Standard...

Designed for the A&K PKM and Raptor PKP. The Daytona Airsoft PKM kit converts your AEG PKM/PKP to a HPA-powered recoil system. No more green gas or propane cooldown.  Standard version offers around 1.5 - 1.8J with 0.20g BBs @ 120 PSI. Low power version offers around 1.0 - 1.3J with...

For use with shop compressor, which usually takes a 1/4 inch hose. Allows you to use a shop compressor to power up your Daytona system for break-in and testing.    

PVC Daytona Patch.

--DISCONTINUED-- Designed for the Ares M110 SASS (SR-25), works for Ares SK-25K with mil-spec buffer tube. The Daytona Airsoft M110 SASS kit converts your AEG Ares M110 to a HPA-powered recoil system that allows you to use AEG SR-25 mid caps. No more green gas or propane cooldown.    Components Material: Machined Steel, brass and...

Friction fit ring WE Scar-L WE Scar-H WE PDW CA G36 CA FAL/SA58 G&P WOC M4 (also compatible with 12.9mm barrel ring) VFC MP5 ZINC BODY 12.4mm c-clip ring WE M4 WE MSK 12.9mm c-clip ring G&P WOC M4 VFC M27 IAR/ HK416/ M4...

Built to order. Lead time: 15 - 20 Business Days.  OEM bolt tank made of machined brass. the set comes with one bolt tank, one bolt tank screw, and a plunger.

Designed for the CA G36C/E/K The Daytona Airsoft G36 kit converts your AEG CA G36 to a HPA-powered recoil system that allows you to use AEG G36 mags. No more green gas or propane cooldown.  Standard version offers around 1.5 - 1.8J with 0.20g BBs @ 120 PSI. Low power version offers...

Designed for the Classic Army / Echo1 FAL and SA58 AEG The Daytona FAL kit converts your AEG FAL to a HPA-powered recoil system that allows you to use AEG FAL mags. No more green gas or propane cooldown. Standard version offers around 1.5 - 1.8J with...

Daytona Gun OEM hopup unit replacement. Please allow 10 - 15 business days to process your order.  Made of machined brass, steel, and aluminum. The set comes with: hopup chamber, barrel ring, feed tube, and standard hopup rubber.

Everything you need to start using your DG! Package includes: 1x Redline mini-SFR HPA Regulator (Widebore, Single QD, DG ready) 1x Carbon Fiber Tank (Lasts around 3K - 5K shots) 1x GetSome 1000 4oz Needle Bottle (Easy to apply, international mail friendly) 1x Daytona...

Soft rubber tip screw (chrome body with rubber tip): -Provides more consistent contact area via soft rubber tip. -Significantly reduces the chance of over-adjusting and tear through the hopup bucking. -Improves hopup performance on both standard DG bucking or rHop patch. One piece screw with rubber...

Designed for the Army Armament or G&G R85 (L85A2) / L85AFV / R86 The Daytona Airsoft L85 kit converts your AEG L85 to a HPA-powered recoil system that allows you to use AEG M4 mags. No more green gas or propane cooldown. Standard version offers around...

Designed for the G&P WOC M4, or Western Arms Spec GBBR M4 with modification. The Daytona Airsoft G&P M4 kit converts your GBBR G&P to a HPA-powered recoil system that allows you to use AEG M4 mags. No more green gas or propane cooldown. Standard version offers around...

***We ship internationally*** **Build to order** Item may take approximately 10 ~ 15 business days to prepare and ship. Contact us for the parts you need. Check the below photos for parts list reference.   

Replacement air hose for your DG system. The price is for 1 line.