Daytona VFC MP5A5 Pre-Built Complete Gun

***We ship internationally***

Contact us to check availability before ordering.

Lead time: 6 - 8 weeks upon receiving donor body and kit. There is NO burst fire mode!

Basic Build Option:

• Completely assembled with all necessary machining.
• Hole pre-drilled for easy hop-up adjustment.
• Trigger mod installed for pull adjustment & airflow maximization.
• QD fitting included.
• Comes with a brass inner barrel.

A basic pre-built complete gun will have everything from the kit properly machined and installed by our expert techs. It will still require some level of break-in and fine-tuning to optimize performance; however, most of the legwork has been completed. This is an ideal base platform for those who enjoy tuning guns and do not have access to machinery.

Fully-tuned Option:

• Completely assembled with all necessary machining.
• Hole pre-drilled for easy hop-up adjustment.
• Trigger mod installed for pull adjustment & airflow maximization.
• POM Crush Ring installed to increase durability.
• QD fitting included.
• Fine-tuned for optimized trigger pull and cycle smoothness.
• Plunger Spring mod installed.
• PDI Sus304 Steel 6.05mm Barrel for even better accuracy and long-lasting performance.
• Flat tip hop-up screw installed.

A fully-tuned pre-built complete gun will have everything from the kit properly machined and installed by our expert techs. It will also include a better barrel group for better performance. The break-in process will be done for you, which means that this gun is ready for the field.

Please note that unless requested otherwise, the build will focus on semi-auto performance. We will ensure full auto is functional; however, due to the design of the Daytona system the performance (of full auto) may vary.

Components Material:

Machined Steel, brass and 6061 aluminum

70 Dura synthetic rubber

Bolt Carrier Material:

Steel bolt with brass bolt tank

Range test:

https://www.youtube.com/watch?v=vDTS1PGO9tQ

Stress Test:

https://www.youtube.com/watch?v=pR3kim5GjV8

The Daytona Airsoft System kit means you can have even more recoil, louder noise than GBB system, and increased effective range like fusion engine, without spending a fortune on GBBR mags. It requires around 2000-4000 bb break-in period where a small number of fliers and chopping of bbs may occur. This is normal while the system is breaking in.

You are required to install an AEG barrel made of either brass or steel. Never use aluminum barrel since it will be bent by hop up set screws. You also need to prepare an HPA tank and Redline regulator with single QD disconnector wide bore airline. 

During the break-in period, please keep lubing your gun with getsome 1000 lubricant. Only use the quality BBs that you intend to use for gaming during break-in, never cheap out.  As soon as all your shots are consistent you can turn on the gradually (1/8 turn each time) until you reach your designated trajectory.

Low Power Modification Required (~320fps w/ 0.2g BB)?

Check our Low Power Airshaft:

-CLICK HERE-

Need Upgrade barrels and/or hopup?

-CLICK HERE-

Installation Guide & Tuning Guide Please visit:

https://daytona-airsoft-support.gorgias.help/en-US

Gun may come with orange tip

International Shipping Disclaimer:

We will strictly follow the local import and transport laws for Airsoft replicas/markers/guns. All Airsoft products we ship will be prepared and modified to be compliant with all requirements;

e.g. we will prepare orange tips for and on all Airsoft replicas/markers/guns sent to US clients, as well as CA and NY compliant orange strips if necessary.

For more information, please --CLICK HERE--